Select Page
Many Lines Makes A Plate

Many Lines Makes A Plate

01. Stringers and Clear Glass Because I’ve detailed the process of assembling stringers for other projects (a bowl with 2mm stringers and a bowl with .5mm stringers), I’m going to skip that part. Plus I forgot to photograph the assembly! But to summarize,...
Bubble Coasters

Bubble Coasters

01. Bubble Sandwich Because I’ve already shown how the 2mm stringer is tack fused and then cut to form the two sides of the this bubble sandwich, I thought I’d just jump right to the final fusing. These smaller bubble projects are intended as coasters and...
Stringer Jewelry

Stringer Jewelry

01. Assorted Stringer After creating a few projects from a tube of assorted opalescent stringer, I thought I’d use it for jewelry. 02. Summer Colors I’m laying out the stringer on top of 3mm white glass and covering it with 3mm clear glass to make a...
Bubble Plate Green

Bubble Plate Green

01. Stringers and Spacers In this photo, I’ve already cut the clear Tekta glass for the plates (3mm thick, 10 x 8 inches). There are also a couple of small coasters I’ll be doing off to their left. The plates and coasters are sitting on a set of four small...
Bubble Plate Red

Bubble Plate Red

01. Stringers and Spacers I’ve already cut the clear Tekta glass (3mm thick, 10 x 8 inches). It’s sitting on a set of four small ceramic dam pieces, elevating it from my gray cutting mat just to make it easier to pick up later.  For the green lines I used...
Pendants

Pendants

01. Pattern Bar This tiny pattern bar is my first attempt at faux murrine. I used 3mm thick, 1/4″ wide strips of French Vanilla sheet glass surrounding Turquoise Blue 2mm stringer. I’ve dammed it and put ceramic fiber paper between glass and dam. Below you...